Microinverter “made in Germany”
From now on one can also feed into the house network with a PV module.
From July 2016 (new TOR D4 with the new definition of small-room generating units up to 600 watts) no network-side approvals are required up to a maximum of 600 W (only a written report with the EVU).
The legally required disconnecting device with connected switching element (NA protection) is integrated in all AE micro-inverters and meets all national standards.
AE Conversion micro inverters meet the requirements of the R 11, since the inverter is mounted close to the source of the source!
Plug & Play
- NA Protection by integrated release device
- Certificate of non-hazardousness on the basis of the test ÖVE/ÖNORM E8001-4-712:2009-12
- Easy installation by Plug & Play (DC and AC side)
- High safety due to low DC system voltages
- IP 45
|P/N||AC power /comm.||Udc / Idc max|
|INV500-90EU PL||500W/Powerline||90Vdc/11 Adc|
|P/N||Description||Udc / Idc max|
|AE 51-05-500004-1||Connector female part||250Vac/20Aac|
|AE 51-05-500003-1||Distribution block 3p Eing./Ausg.||250Vac/20Aac|
|AE 51-05-500002-1||Socket end cap 3p||250Vac/20 Aac|
|AE 16-05-500250-1||Extension 3p 2m / 2,5 mm²||250Vac/20 Aac|
|AE 11-05-500285-1||Datenloggger max. 50 INV +Powerline|